GLEITMO 705

gleitmo 705 is a grey lubricating paste, with good spreading properties, for use at high temperatures. A special synthetic oil containing a large amount of a gleitmo solid lubricant combination provides this product with good lubrication and separating properties. The carrier oil evaporates gradually at continuous temperatures exceeding 180 °C. A dry lubricating film is formed which lubricates under mixed and boundary friction conditions up to +1,000 °C and provides protection against wear. There is only very slight residue from the carrier oil, and this residue has a favourable effect in the subsequent lubrication process.

Lubrication of low-speed bearings, bolts, hinges, slipper pads and slide rails on firing, drying and an-nealing systems. Casting channels in permanent mold casting plants. Die casting machines: ejector pins and other moving parts.

Wherever high temperatures preclude the use of oils and greases and wherever slow, also oscillating movements occur or a good release effect is re-quired.

Furthermore gleitmo 705 is suitable as facing for casting ladles, tools, funnels and spouts in aluminium die casting.

In die casting: Apply a thin and uniform film of gleitmo 705 using a brush or tassel. Burn in above the melting or flame off until the pasty coating is dry – until the dry light-grey residue is obtained.