GLEITMO WSP 5040

gleitmo WSP 5040 is a high-performance grease paste based on a high-grade, special calcium-complex base grease with a synergetic combination of highly effective white solid lubricants.

gleitmo WSP 5040 is used for all kinds of machine parts subjected to extreme pressures, impulse loads and/or vibrating or oscillating movements. It is particularly appropriate if the surrounding area is subject to high humidity or the effects of splash water.
For sliding pairings, which have a tendency to stick slip and fretting (seizure). At low sliding speeds and high pressures as well as where fretting corrosion (tribocorrosion) occurs.
gleitmo WSP 5040 is particularly suitable for lubricating chucks and tensioning elements.
In addition to that gleitmo WSP 5040 has proved itself as assembly paste and can be used as screw paste – in this case also in the high-temperature range up to 1,200 °C.
Other typical applications:
Spindles, large armatures, sliding guides, sliding bearings, oscillating bolts on construction machinery, tilting bearings, stainless steel connections, etc.
Because of the high proportion of solid particles, gleitmo WSP 5040 should not be used for lubricating roller bearings.

Apply gleitmo WSP 5040 with spatulas, brushes or lint-free cloths onto the previously cleaned (if possible) surfaces. Otherwise as is normal with greases.
gleitmo WSP 5040 is also available as a spray with the article no. 6389.